Description

The 3G-SDI/ST2110 over IP Uncompressed Gateway Converter (Transceiver) supports the ST-2110 AV over IP protocol standard for Broadcast applications. This unit is a Transceiver and can be configured as a Transmitter or Receiver for added flexibility and convenience. The unit allows 3G-SDI equipment to be utilized in a broadcast environment over a network, while extending end point source and sink devices up to 100ft (30m) via UTP Cat 6a/7 cable, up to 1080p resolution @ 60Hz uncompressed, in a point-to-point configuration. Point-to-multipoint and multipoint-tomultipoint configurations are also supported by connecting several units to a 10G Ethernet network. The device supports ST-2022-7 (Class D) Redundancy for critical fail-safe applications allowing the audio/video signal to run over two independent 10G Ethernet Networks. The unit provides a 1G Ethernet Network port for control via 3 rd party management platforms supporting a RestAPI, or NMOS (IS-04 for discovery and IS-05 for connectivity management). 

For more detailed description and product specifications, see datasheet below

Features

• Supports Uncompressed 3G-SDI video up to 1080p @ 60Hz and SMPTE ST-2110 over a 10G Ethernet network
• Supports ST-2022-7 (Class D) Data Link Redundancy
• Extend SDI over an IP network up to 100ft (30m) over UTP Cat 6a/7
• Supports 100’s of Transmitters & Receivers depending on network bandwidth
• Supports point-to-point, point-to-multipoint and multipointto-multipoint applications
• Supports two 10G Ethernet ports for redundant audio/video signal transmission
• Supports a 1G Ethernet port for 3 rd party unit control
• Audio insert (TX) & audio extract (RX) ports (future use)
• RS232 for remote control of end devices (future use)
• Manage with 3rd party control software platforms supporting a Rest API and NMOS (IS-04 & IS-05)