Produkt dem Warenkorb hinzugefügt Warenkorb anzeigen
Gefen EXT-UHD600-41
4K Ultra HD 600 MHz 4x1 Switcher
Ultra HD 600 MHz 4x1 Switcher for HDMI w/ HDCP 2.2 & HDR 4K 60 Hz, 4:4:4
679.00 CHF (734.00 CHF inkl. MwSt.)

Route up to four HDMI 2.0 Ultra HD sources to a 4K display with
ease and convenience

Designing systems capable of distributing 4K Ultra High Definition media requires support for the content of today, and headroom for the content of tomorrow. The Gefen EXT-UHD600-41 Switcher routes signal from up to four 4K sources to a single 4K display or video zone. The switcher features a low profile, compact, and surface-mountable enclosure that can fit in tight places. It also accommodates Gefen locking HDMI cables for secure connections.

Video Support

Gefen's Ultra HD 600MHz Series 4x1 switcher takes HDMI 2.0 to its highest specification of 4K 60 Hz at 4:4:4 chroma subsampling, along with HDR (High Dynamic Range) support. They go beyond the requirements of typical 4K systems, delivering stunning Ultra HD and DCI/Cinema picture up to 4096 x 2160 pixels at 60 frames per second without subsampling color. This ensures that the scene shown on the display is every bit as brilliant as the picture that the camera captured. HDR lets every subtle nuanced gradation of each pixel play out across the screen in immersive clarity. Gefen's Ultra HD 600MHz Series creates a seamless bridge between the digital media of yesterday, today, and tomorrow. Supporting the digital rights management standard for Ultra High Definition content, HDCP 2.2, as well as the legacy HDCP 1.4, Gefen's Ultra HD 600MHz Series of products can handle the signal routing needs for both existing and new digital AV components in commercial AV systems.

Audio Support

The Ultra HD 600MHz Series supports stereo and multichannel digital audio including 7.1 channels of LPCM as well as the highest performance HBR (High Bit Rate) digital audio formats such as Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master.

Multilayer Cascading

These splitters have been specifically designed to support multiple layers of cascading for flawless performance in large video distribution and signage applications, supporting up to hundreds of displays.

Syner-G™ Support

Gefens Ultra HD 600MHz Series was designed to work with Gefens Syner-G™ software suite. EDID and HDCP management, status monitoring, and firmware updates can be done in minutes using the Gefen Syner-G software.
 

Gefen EXT-UHD600-41 Features at a Glance

  • Routes up to four Ultra Hi-Def sources to one Ultra HD display
  • Supports resolutions up to 4K DCI-Cinema (4096 x 2160 at 60 Hz, 4:4:4), 4K Ultra HD (3860 x 2160 at 60Hz, 4:4:4), 1080p Full HD, & 1920x1200 (WUXGA)
  • Supports HDCP 2.2 and 1.4
  • Supports HDR (High Dynamic Range) 10-bit Deep Color at 4K 60 Hz 4:2:0 and 4K 24 Hz 4:4:4
  • Supports 12-bit Deep Color at 1080p 60 Hz 4:4:4
  • 3DTV pass-through
  • Lip Sync pass-through
  • Advanced EDID and HDCP Management via Web Server Interface for rapid integration of sources and display
  • Supports uncompressed LPCM digital audio up to 7.1 channels
  • Supports up to 7.1 channels of HBR (High Bit Rate) digital audio including Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™
  • Supports the use of DVI sources and DVI displays up to 1080p Full HD and 1920x1200 (WUXGA), with HDMI-to-DVI adapters (not included)
  • Configurable Automatic Input Switching selects the most recent connected or powered-up source
  • Front Panel Push button Input Selector routes one of the 4 connected sources to the display, or “Blocks” (turns off) the input
  • RS-232 Serial interface for use with an automation control system
  • IP control via Telnet, UDP, and the built-in web server interface
  • IR remote control
  • Small surface-mountable IR Extender module allows the switcher to be hidden away behind the display or in the equipment closet
  • Gefen Syner-G™ software’s Discovery and Show-Me features simplify initial IP configuration
  • In-field firmware update via Web Server Interface
  • Long Reach Power (LRP) provides 500 mA at 5V on pin 18 of HDMI output. Enables select extender devices to be powered through their HDMI input port
  • Locking power connector ensures reliable operation
  • Low-profile, surface-mountable enclosure can be surface mounted, placed on a shelf, or hidden away behind the display
     

In the Box:

1x  Ultra HD 600 MHz 4x1 Switcher for HDMI w/ HDR
1x  5V Power Supply w US/EU/UK/AU plugs
1x  IR Extender Module (EXT-RMT-EXTIRN)
1x  Hand-held IR Remote
2x  Surface Mounting L-Brackets
4x  M3 6 mm Machine screws for mounting the L-Brackets to unit
2x  6-32 5 mm Machine screws for mounting the unit to Gefen EXT-RACK-1U-GRY (available separately)
4x  Self-Adhesive Rubber Feet
1x  Quick-Start Guid

Technische Daten

Maximum Pixel Clock: 600 MHz
HDMI Input Connectors: (4) Type A 19-pin female, locking
HDMI Output Connector: (1) Type A 19-pin female, locking
HDMI Output pin 18 current capability at 5V: 500 mA
RS-232 serial port: (1) DB-9, female
Ethernet (IP Control) Port: (1) RJ-45
IR Sensor: (1), located on front panel
IR In/Ext Port: (1) 3.5mm mini-stereo jack
IR Extender type: EXT-RMT-EXTIRN
Power Indicator: (1) LED, blue
Input Indicators: (4) LEDs, green/amber
(1) LED, green
Input Selector Switch: (1) tact-type
Reset Switch: (1) recessed tact-type
DC Power Connector: (1) Locking type
Power Supply: 5V DC
Power Consumption: 7W
Operating Temperature: +32 to +122 °F (0 to +50 °C)
Operating Humidity: 5% to 90% RH, non-condensing
Storage Temperature: -4 to +185 °F (-20 to +85 °C)
Storage Humidity: 0% to 95% RH, non-condensing
MTBF: 300000 hours
Dimensions (W x H x D, without connectors or feet): 8.4” x 1“ x 3.7” (213mm x 25mm x 93mm)
Net Weight: 0.75 lbs (0.3 kg)
Shipping Weight: 2.2 lbs (1 kg)

Datenblätter